Standard Pet Bed Heater (PN)

Pet bed heater

Fitted with a standard 1.3 meter cable. (22cm x 33cm) and is designed for 230v 50Hz operation

• Made from a slim alloy panel 22cm by 33cm (9" x 13.5") in size, designed to fit easily into you pet's bed.
• Fitted with a low wattage heating element, they produce enough heat output to reach "warm to the touch" temperature within half an hour.
• The low power consumption (approx 10/15 watts) means running costs are minimal, typically consuming 1/10th of the power of a domestic light bulb.
• Fitted with 13 amp plug and fused at 13 amps

For added control we recommend considering a Petnap Dusk to Dawn timer, and for additional safety a Petnap RCD adaptor (residual current disconnector). Many homes are fitted with these at the meter, but if not, RCD adaptors can be used at the plug point for additional protection.

Safety and good practice

As with any heater, if your animal is very old, ill or unable to shift position by themselves, please make sure you alter their position regularly.

Please allow up to 5 working days for delivery